Product Details
Brief Introduction
| Standard: | API 5L, API 5CT, ASTM 53, EN10217, DIN 2458. IS 3589, GB/T3091, GB/T9711 |
Certificate: | API 5L PSL1 / PSL2, API 5CT |
Out Diameter: | 219.1mm -3046mm (8” -72&rdquo) |
Wall Thickness: | 5.0 -50mm |
Length: | Up to 12m |
Steel Grade: | API 5L: GR B, X42,X46, X56, X60,X65,X70 |
ASTM A53: GR A, GR B, GR C | |
EN: S275, S275JR, S355JRH, S355J2H | |
GB: Q195, Q215, Q235, Q345, L175, L210, L245, L320, L360- L555 | |
Surface Treatment: | Fusion bond Epoxy coating, Coal Tar Epoxy, 3PE, Vanish Coating, Bitumen Coating, Black Oil coating as per customer’s requirement |
Test: | Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test. |
Mill Test Certificate: | EN 10204/3.1B |
API 5L X Grades
| Grade | Chemical Composition | Yield Strength | Tensile Strength | Yield to Tensile | Elongation | |||||||
C | Si | Mn | P | S | V | Nb | Ti | min. (KSI) | min. (KSI) | Ratio (max) | % | |
API 5L X52 | 0.16 | 0.45 | 1.65 | 0.020 | 0.010 | 0.07 | 0.05 | 0.04 | 52 | 66 | 0.93 | 21 |
API 5L X56 | 0.16 | 0.45 | 1.65 | 0.020 | 0.010 | 0.07 | 0.05 | 0.04 | 56 | 71 | 0.93 | 19 |
API 5L X60 | 0.16 | 0.45 | 1.65 | 0.020 | 0.010 | 0.08 | 0.05 | 0.04 | 60 | 75 | 0.93 | 19 |
API 5L X65 | 0.16 | 0.45 | 1.65 | 0.020 | 0.010 | 0.09 | 0.05 | 0.06 | 65 | 77 | 0.93 | 18 |
API 5L X70 | 0.17 | 0.45 | 1.75 | 0.020 | 0.010 | 0.10 | 0.05 | 0.06 | 70 | 82 | 0.93 | 17 |
API 5L General Information
The API SPEC 5L specification provides standards for pipe suitable for use in conveying gas, water, and oil in the natural gas and oil industries. The API SPEC 5L covers seamless and welded steel line pipe. It includes plain-end, threaded-end, and belled-end pipe, as well as through-the-flowline (TFL) pipe, and pipe with ends prepared for use with special couplings.
Pipe manufactured to ASTM106 Grade A or B are not interchangable with API 5L. Requirements to API 5L X grades are more stringent; rolled grades are not acceptable and rework is not allowed. Moreover, particular attention is given to toughness and toughness tests for sour services and higher pressure & temperature classes.
Strength Levels & Desulphurization
Manganese sulphides are typical inclusions in all manganese alloyed steels. Because they tend to segregate resulting in reduced impact strength, sulphure content needs to be minimized. We specify maximum 0.007%.
API 5L Benefits & Applications
*Gas, water and oil transportation - preferred in long pipelines due to inexpensiveness
*Pipeline steel - resistance to crack propogation
*Line Pipe / Sour Service Line Pipes
API Standard Specification for Line Pipe
The American Petroleum Institute specification API 5L addresses seamless and welded steel line pipe for pipeline transportation systems in the petroleum and natural gas industries. API 5L is suitable for conveying gas, water, and oil.
Specifications for API 5L adhere to the International Organization for Standardization ISO 3183, standardizing pipeline transportation systems within the materials, equipment and offshore structures for natural gas, petroleum, and petrochemical industries. When authoring the standards, the technical committee recognized that there are two basic Product Specifications Levels (PSL) of technical requirements and therefore developed PSL 1 and PSL 2. PSL 1 is a standard quality for line pipe where PSL 2 contains additional chemical, mechanical properties, and testing requirements.
Grades covered by this specification are A25, A, B and "X" Grades X42, X46, X52, X56, X60, X65, X70, and X80. The two digit number following the "X" indicates the Minimum Yield Strength (in 000's psi) of pipe produced to this grade.
Product manufacturing process
Product details
Product size
Certifications of product
Product Applications
Packaging and transportation
Cangzhou Steel Pipe Group (CSPG)Co.,Ltd.
No.92 JieFang East Road ,Cangzhou City, Hebei,P.R.China.
has more than eighteen years history company which located in Lecong Iron and Steel World, a well-known steel distribution center in China, with superior geographical position and convenient water and land transportation.
We are a direct-selling manufacturer specializing in the research and development of spiral steel pipes, steel coiled pipes, anti-corrosion steel pipes inside and outside. Since its inception, the company has been guided by a brand-new thinking of steel pipe product market based on the business philosophy of honesty, pragmatism and knowledge-seeking.
FAQ
Why to choose us?
1.We provide products to our customers individual specifications and special needs with competitive price and best service.
2. Immediate respond
We will be 24/7 on line at your services. Provide one-to-one service with our sincerity.
3. Professional suggestions
We could provide you the professional suggestion with our expertise acumen.
4. Short delivery period
We are based on a long-term cooperation with several major domestic steel company with an outstanding advantage is sufficient supply. Shorter the supplying period.
