China Spiral Fittings Suppliers, Manufacturers, Factory

Product Details

spiral fittings Spiral steel pipe edge milling machine milling groove Angle is accurate, from the beginning to the end unchanged, can avoid forming seam "tight and loose" or "tight and loose" and other defects;Spiral steel pipe edge milling machine milling out of the steel belt edge and groove surface roughness is good, reduce the wrong side, burn through, voltage and current fluctuations of defects;Spiral steel pipe edge milling machine can eliminate part of the crescent bending, smooth through the joint;Milling out welding groove on both sides of the steel belt at the same time ensures the width of the steel belt unchanged, which is conducive to the stability of the forming quality of the steel belt.

Brief Introduction

spiral fittings

Name	SSAW steel pipe
Nominal size	1-8 Inch
Out diameter	21.3-219.1mm
Thickness	0.5-8.0mm
Materials	Q235A, Q235B, 0Cr13, 1Cr17, 00Cr19Ni11, 1Cr18Ni9, 0Cr18Ni11Nb
Appearance	Generally smooth, bright
Packing	Export standard packing or according to customers’ requirement
Certificate	ISO9001:2008,SGS
Shipment	Within10-15 workdays,25-30days when the quantity beyond 1000tons

Spiral Fittings after cutting into a single steel tube, the first three steel tubes in each batch shall be subject to a strict first inspection system to check the mechanical properties, Spiral Fittings chemical composition, melting state, surface quality of the steel tube and nondestructive inspection to ensure that the pipe manufacturing process is qualified before it can be formally put into production.

the Spiral Fittings part marked by continuous acoustic inspection on the weld shall be subject to manual ultrasonic and X-ray reexamination. If there is any defect, it shall be repaired and then Spiral Fittings subjected to nondestructive inspection again until the defect is confirmed to be eliminated.

the Spiral Fittings pipe where the butt weld of the strip and the t-joint intersecting the spiral weld are located shall be inspected by X-ray television or film.Spiral Fittings each steel tube is hydrostatic tested, and the pressure is sealed radially.The test pressure and time are strictly controlled by the microcomputer testing device for water pressure of steel tube.Test Spiral Fittings parameters are automatically printed and recorded.Spiral Fittings the pipe end is machined to ensure the verticality of the end face, bevel Spiral Fittings Angle and blunt edge are accurately controlled.

The Process Flow

螺旋1

The Application

The Workshop

Cangzhou Steel Pipe Group (CSPG)Co.,Ltd.

has more than eighteen years history company which located in Lecong Iron and Steel World, a well-known steel distribution center in China, with superior geographical position and convenient water and land transportation.

We are a direct-selling manufacturer specializing in the research and development of spiral steel pipes, steel coiled pipes, anti-corrosion steel pipes inside and outside. Since its inception, the company has been guided by a brand-new thinking of steel pipe product market based on the business philosophy of honesty, pragmatism and knowledge-seeking.