Product Details
24 Inch API 5L Gr B Sch40 galvanized seamless pipe The strain rate shall not exceed 0.0025/s in the plastic range and up to the specified strength (specified non-proportional elongation strength, specified total elongation strength and specified residual elongation strength)."There is a...
Brief Introduction
Standard | API A106 GR.B A53 Gr.B seamless steel pipe / ASTM A106 Gr.B A53 Gr.B steel tube AP175-79, DIN2I5L , ASTM A106 Gr.B, ASTM A53 Gr.B, ASTM A179/A192/A213/A210 /370 WP91, WP11,WP22. DIN17440, DIN2448,JISG3452-54.DIN17175 |
Material | API5L,Gr.A&B, X42, X46, X52, X56, X60, X65, X70, X80, ASTM A53Gr.A&B,ASTM A106 Gr.A&B, ASTM A135, ASTM A252, ASTM A500, DIN1626, ISO559, ISO3183.1/2, KS4602, GB/T911.1/2,SY/T5037, SY/T5040 STP410,STP42. ST37 ST42 ST52 |
Certificates | API5L ISO 9001:2008 TUV SGS BV etc |
Outside Diameter | 1/2'--24' |
21.3mm-609.6mm | |
Thickness | SCH5S, SCH10S, SCH20S,SCH20, SCH30,STD, SCH40, SCH60, SCH80, SCH100, SCH140, SCH160,XS, |
1.65mm-59.54mm | |
Length | 5.8m 6m Fixed, 12m Fixed, 2-12m Random. |
Technic | 1/2'--6': hot piercing processing technic |
6'--24' : hot extrusion processing technic | |
Surface Treatment | Black Painted, Galvanized, Natural, Anticorrosive 3PE coated,polyurethane foam Insulation . |
Packing | Bundles or In bulk. bundled pipes with two slings at the both end for easy loading and discharging, |
End | Bevel end(>2"), Plain (≤2"),with plastic cap, with screwed and socket. |
Usage /Application | Oil pipe line, Drill pipe, Hydraulic pipe, Gas pipe, Fluid pipe, Boiler pipe,Conduit pipe, Scaffolding pipe pharmaceutical and ship building etc. |
24 Inch API 5L Gr B Galvanized Seamless Pipe
The strain rate shall not exceed 0.0025/s in the plastic range and up to the specified strength (specified non-proportional elongation strength, specified total elongation strength and specified residual elongation strength)."There is a very crucial problem, which is the switching point between stress velocity and strain velocity.Is the point at the end of the elastic section for stress velocity to strain velocity switching.In the process of switching to ensure that there is no impact, no force.This is a very key technology of the tensile testing machine.Secondly, the clamping, tracking and removing time of the extensometer.For the test of tube tension, if the total elongation (agt) under force is required, the extensometer must be tracked until later.The extensometer can directly track the fracture of samples with little impact after the tube is broken.However, for the samples with large tensile force, the position of the beam should be kept still. After the extensometer is removed, the sample will be broken.Some clamps will produce an initial force when clamping the specimen. It is necessary to eliminate the initial force before clamping the extensometer. In this way, the clamping range of the extensometer is the original range of the specimen in the free state.There are not many fluid pipes in tianjin that can do this test. Please pay attention to these points when you choose and use.American standard PIPE SMLS,BE steel PIPE spot = fuxin JIS G3452 piping carbon steel PIPE manufacturer
Edit by Ms. Vicky of CSPG
Contact us directly by:
Email: ella@cnspipe.com ,vicky@cnspipe.net
Tel / Whatsapp: +86-180327140146
Skype: cnspipe002