Product Details
ASTM A252 Welded Steel Pipe Piles Covers Nominal Wall Cylindrical Steel Pipe Piles In Which The Steel Cylinder Acts As A Permanent Load-Carrying Member Or As A Shell To Form Cast-In-Place Concrete Piles.
Brief Introduction
ASTM A252 Welded Steel Pipe Piles
ASTM A252 Welded Steel Pipe Piles (SSAW Steel PIPE) Additions: Thickness: 5~30mm Diameter: 219mm-3520mm Material: Q195,Q215,Q235,Q345(B,C,D,E) Certification: ISO9001, BV, API Standard: ASTM GB DIN API IS EN BS. | |
Diameter | 219MM - 3520MM |
Thickness | 5-30mm |
Length | 3m-12m,by customers request |
International standard | ISO9001-2008 |
Certification | ISO9001, API, BV, ABS |
Standard | ASTM A53,BS1387-1985,GB/T3091-2001,GB/T13793-92, GB/T6728- 2002,API 5L |
Material: | Q195,Q215,Q235,Q345(B,C,D,E) |
Technique | SSAW |
Packing | 1.Big OD: in bulk vessel |
Usage | Mechanical & manufacture, Steel structure, |
Remark | 1.Payment terms : T/T, L/C |
ASTM A252 Standard Specification
ASTM A252 Welded Steel Pipe Piles standard covers nominal wall cylindrical ASTM A252 Welded Steel Pipe Piles in which the steel cylinder acts as a permanent load-carrying member or as a shell to form cast-in-place concrete piles.
EachASTM A252 Welded Steel Pipe Piles shall be made by seamless, electric resistance welding, flash welding or fusion welding with longitudinal, helical-butt, or helical-lap seams.
| Scope | ASTM A671 TABLE 1 | ASTM A672 TABLE 1 | ASTM A691 TABLE 1 |
Size and weights per unit length values.
This standard is issued under the fixed designation A 252; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon indicates an editorial change since the last revision or reapproval.
This ASTM A252 Welded Steel Pipe Piles specification has been approved for use by agencies of the Department of Defense. Consult the DoD Index of ASTM A252 Welded Steel Pipe Piles Specifications and Standards for specific year of issue which has been adopted by the Department of Defense.
1. Scope:
1.1 This ASTM A252 Welded Steel Pipe Piles specification covers nominal (average)wall steel pipe piles of cylindrical shape and applies to pipe in which the steel cylinder acts as a permanent load-carrying member, or as a shell to form cast-in place concrete piles.
1.2 The ASTM A252 Welded Steel Pipe Piles values stated in inch-pound units are to be regarded as the standard.
1.3 The ASTM A252 Welded Steel Pipe Piles following precautionary caveat pertains only to the test method portion, Section 16 of this specification. This standard does not purport to address all of the safery problems, if any, associated with its use. It is the responsi-bility of the user of this standard to establish applicability of regulatory limitations prior to use.
JIS Number and Corrensponding Foreign Standards
API 5L | B X42. X46. X52. X60 .X65. X70. X80. X100 | Line Pipe (PSL1. PSL2) |
API 2B | Fabrication of Structure Steel Pipe | |
ASTM A134 | Pipe, Steel, Electric-Fusion(Arc)-Welded (Size NPS 16 and over) | |
ASTM A139 | A, B | Electric-Fusion(Arc)-Welded Steel Pipe (Size NPS 4 and over) |
ASTM A252 | 1, 2, 3 | Welded and Seamless Steel Pipe Piles |
ASTM A671 | All | Electric-Fusion-Welded Steel Pipe for Atmospheric & Low Temperature |
ASTM A672 | All | Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperature |
ASTM A691 | Carbon and Alloy Steel Pipe, Electric-Fusion Welded for High Pressure Service at High Temperatures | |
JIS G 3444 | STK | Carbon Steel Tubes for General Structural Purpose |
JIS G 3457 | STPY 400 | Arc Welded Carbon Steel Pipe |
KS D 3583 | SPW 400 | Arc Welded Carbon Steel Pipe |
KS D 3566 | STK | Carbon Steel Tubes for General Structural Purpose |
ASTM A671 TABLE 1 Plate Specifications
Pipe Grade | Type of Steel | ASTM Specification | |
No. | Grade | ||
CA 55 | plain carbon | A 285/A 285M | C |
CB 60 | plain carbon, killed | A 515/A 515M | 60 |
CB 65 | plain carbon, killed | A 515/A 515M | 65 |
CB 70 | plain carbon, killed | A 515/A 515M | 70 |
CC 60 | plain carbon, killed, fine grain | A 516/A 516M | 60 |
CC 65 | plain carbon, killed, fine grain | A 516/A 516M | 65 |
CC 70 | plain carbon, killed, fine grain | A 516/A 516M | 70 |
CD 70 | manganese-silicon, normalized | A 537/A 537M | 1 |
CD 80 | manganese-silicon, quenched and tempered | A 537/A 537M | 2 |
CE 55 | plain carbon | A 442/A 442M | 55 |
CE 60 | plain carbon | A 442/A 442M | 60 |
CF 65 | nickel steel | A 203/A 203M | A |
CF 70 | nickel steel | A 203/A 203M | B |
CF 66 | nickel steel | A 203/A 203M | D |
CF 71 | nickel steel | A 203/A 203M | E |
CJ 101 | alloy steel, quenched and tempered | A 517/A 517M | A |
CJ 102 | alloy steel, quenched and tempered | A 517/A 517M | B |
CJ 103 | alloy steel, quenched and tempered | A 517/A 517M | C |
CJ 104 | alloy steel, quenched and tempered | A 517/A 517M | D |
CJ 105 | alloy steel, quenched and tempered | A 517/A 517M | E |
CJ 106 | alloy steel, quenched and tempered | A 517/A 517M | F |
CJ 107 | alloy steel, quenched and tempered | A 517/A 517M | G |
CJ 108 | alloy steel, quenched and tempered | A 517/A 517M | H |
CJ 109 | alloy steel, quenched and tempered | A 517/A 517M | J |
CJ 110 | alloy steel, quenched and tempered | A 517/A 517M | K |
CJ 111 | alloy steel, quenched and tempered | A 517/A 517M | L |
CJ 112 | alloy steel, quenched and tempered | A 517/A 517M | M |
CJ 113 | alloy steel, quenched and tempered | A 517/A 517M | P |
CK 75 | carbon-manganese-silicon | A 299/A 299M | |
CP 65 | alloy steel, age hardening, nomalized and precipitation heat treated | A 736/A 736M | 2 |
CP 75 | alloy steel, age hardening, nomalized and precipitation heat treated | A 736/A 736M | 3 |
ASTM A672 TABLE 1 Plate Specifications
Pipe Grade | Type of Steel | ASTM Specification | |
No. | Grade | ||
A45 | plain carbon | A 285 | A |
A50 | plain carbon | A 285 | B |
A65 | plain carbon | A 285 | C |
B55 | plain carbon, killed | A 515 | 55 |
B60 | plain carbon, killed | A 515 | 60 |
B65 | plain carbon, killed | A 515 | 65 |
B70 | plain carbon, killed | A 515 | 70 |
C55 | plain carbon, killed, fine grain | A 516 | 55 |
C60 | plain carbon, killed, fine grain | A 516 | 60 |
C65 | plain carbon, killed, fine grain | A 516 | 65 |
C70 | plain carbon, killed, fine grain | A 516 | 70 |
D70 | manganese-silicon-nomalized | A 537 | 1 |
D80 | manganese-silicon-Q&T A | A 537 | 2 |
E55 | plain carbon | A 442 | 55 |
E60 | plain carbon | A 442 | 60 |
H75 | manganese-molybdenum-nomalized | A 302 | A |
H80 | manganese-molybdenum-nomalized | A 302 | B, C or D |
J80 | manganese-molybdenum-Q&T A | A 533 | CI-1 B |
J90 | manganese-molybdenum-Q&T A | A 533 | CI-2 B |
J100 | manganese-molybdenum-Q&T A | A 533 | CI-3 B |
K75 | chromium-manganese-silicon | A202 | A |
K857 | chromium-manganese-silicon | A202 | B |
L65 | molybdenum | A204 | A |
L70 | molybdenum | A204 | B |
L75 | molybdenum | A204 | C |
N75 | manganese-silicon | A 299 | ... |
A Q&T = quenched and tempered.
ASTM A691 TABLE 1 Plate Specifications
Pipe Grade | Type of Steel | ASTM Specification | HB, max A | |
Number | Grade | |||
CM-65 | carbon-molybdenum steel | A 204/A 204M | A | 201 |
CM-70 | carbon-molybdenum steel | A 204/A 204M | B | 201 |
CM-75 | carbon-molybdenum steel | A 204/A 204M | C | 201 |
CMSH-70 | carbon-manganese-silicon steel, normalized | A 537/A 537M | 1 | |
CMS-75 | carbon-manganese-silicon steel | A 299/A 299M | ... | ... |
CMSH-80 | carbon-manganese-silicon steel, quenched and tempered | A 537/A 537M | 2 | |
1/2 CR | 1/2% chromium, 1/2% molybdenum steel | A 387/A387M | 2 | 201 |
1CR | 1% chromium, 1/2% molybdenum steel | A 387/A387M | 12 | 201 |
1 1/4 CR | 1 1/4% chromium, 1/2% molybdenum steel | A 387/A387M | 11 | 201 |
2 1/4CR | 2 1/4% chromium, 1% molybdenum steel | A 387/A387M | 22 | 201 |
3CR | 3% chromium, 1% molybdenum steel | A 387/A387M | 2f | 201 |
5CR | 5% chromium, 1/2% molybdenum steel | A 387/A387M | 5 | 225 |
9CR | 9% chromium, 1% molybdenum steel | A 387/A387M | 9 | 241 |
ASTM A-252 mechanical properties:
GRADE | YIELD | TENSILE |
1 | 30 000(205) | 50 000(345) |
2 | 35 000(240) | 60 000(414) |
3 | 45 000(310) | 66 000(455) |
The Process Flow
The Application
The Workshop
Cangzhou Steel Pipe Group (CSPG)Co.,Ltd.
No.92 JieFang East Road ,Cangzhou City, Hebei,P.R.China.
has more than eighteen years history company which located in Lecong Iron and Steel World, a well-known steel distribution center in China, with superior geographical position and convenient water and land transportation.
We are a direct-selling manufacturer specializing in the research and development of spiral steel pipes, steel spiral pipes, anti-corrosion steel pipes inside and outside. Since its inception, the company has been guided by a brand-new thinking of steel pipe product market based on the business philosophy of honesty, pragmatism and knowledge-seeking.
FAQ
Why to choose us?
1.We provide products to our customers individual specifications and special needs with competitive price and best service.
2. Immediate respond
We will be 24/7 on line at your services. Provide one-to-one service with our sincerity.
3. Professional suggestions
We could provide you the professional suggestion with our expertise acumen.
4. Short delivery period
We are based on a long-term cooperation with several major domestic steel company with an outstanding advantage is sufficient supply. Shorter the supplying period.
