Surface treatment of high frequency welded steel pipe

- Feb 03, 2021-

 With the continuous development of China's economy, the country vigorously develops the energy industry. Long-distance oil and gas pipelines are an important way of energy security. In the process of anti-corrosion construction of oil (gas) pipelines, the surface treatment of steel pipes is the key factor determining the service life of pipelines. First, it is the premise of whether the anti-corrosion layer and the steel pipe can be firmly combined. According to the research institute's verification, the life of the anti-corrosion layer depends on the coating type, coating quality and construction environment. The surface treatment of the steel pipe affects the life of the anti-corrosion layer by about 50%. Therefore, it should be strictly in accordance with the anti-corrosion layer specification. The requirements of the surface of the steel pipe are continuously explored and summarized, and the surface treatment method of the steel pipe is continuously improved.

  1, cleaning

  Solvents and emulsions are used to clean the surface of steel to remove oil, grease, dust, lubricants and similar organic matter, but it can not remove rust, scale, flux, etc. on the surface of steel, so it is only used as an auxiliary means in anti-corrosion production.

  2, tool rust removal

  The steel surface is mainly polished by a tool such as a wire brush to remove loose or raised scale, rust, welding slag, and the like. The rust removal of the hand tool can reach the Sa2 level, and the rust removal of the power tool can reach the Sa3 level. If the surface of the steel is adhered to the iron oxide scale, the rust removal effect of the tool is not ideal, and the anchor depth required for the anti-corrosion construction cannot be achieved.

  3, pickling

  Generally, chemical cleaning and electrolysis are used for pickling treatment. Pipeline anti-corrosion is only chemical pickling, which can remove scale, rust and old coating, and can sometimes be used as re-treatment after sandblasting and rust removal. Although chemical cleaning can achieve a certain degree of cleanliness and roughness, its anchor pattern is shallow and it is easy to cause environmental pollution.

  4, spray (throwing) shot rust removal

  Spraying (polishing) rust removal is a high-speed motor that drives the spray (throwing) to rotate the blade at high speed, so that the abrasive grains such as steel grit, steel shot, wire segment and mineral are sprayed (throwing) on the surface of the steel tube under the action of centrifugal force. Not only can rust, oxides and dirt be completely removed, but the steel tube can also achieve the required uniform roughness under the action of abrasive impact and friction.

  After spraying (polishing) and removing rust, not only can the physical adsorption of the surface of the tube be enlarged, but also the mechanical adhesion of the coating layer to the surface of the tube can be enhanced. Therefore, spray (throwing) radiation derusting is the ideal way to remove corrosion from pipelines. In general, blasting (sand) rust is mainly used for the inner surface treatment of pipes, and blasting (sand) rust is mainly used for the outer surface treatment of pipes. There are several problems to be aware of when using blasting to remove rust.

  4.1 Rust removal level

  For the construction process of epoxy, vinyl, phenolic and other anticorrosive coatings commonly used in steel pipes, it is generally required that the surface of the steel pipe reaches near white level (Sa2.5). Practice has proved that the use of this descaling level can almost remove all oxide scale, rust and other dirt, anchor depth of 40 ~ 100μm, fully meet the adhesion requirements of anti-corrosion layer and steel pipe, and spray (throwing) The rust process can achieve near-white (Sa2.5) technical conditions with lower operating costs and consistently reliable quality.

  4.2 spray (throwing) abrasive

  In order to achieve the desired descaling effect, the abrasive should be selected according to the hardness of the surface of the steel pipe, the degree of original corrosion, the required surface roughness, the type of coating, etc. For single-layer epoxy, two-layer or three-layer polyethylene coating, Mixed abrasives of steel sand and steel shots are more likely to achieve the desired descaling effect. Steel shots have the effect of strengthening the steel surface, while steel sand has the effect of etching the steel surface. Mixed abrasive of steel sand and steel shot (usually the hardness of steel shot is 40 ~ 50HRC, the hardness of steel sand is 50 ~ 60HRC can be used on various steel surfaces, even on the surface of steel grade C and D rust, except The rust effect is also very good.

  4.3 Abrasive particle size and ratio

  In order to obtain better uniform cleanliness and roughness distribution, the particle size and proportion design of the abrasive is very important. The roughness is too large, which may cause the anti-corrosion layer to become thinner at the anchor peak; at the same time, because the anchor pattern is too deep, the anti-corrosion layer is easy to form bubbles during the anti-corrosion process, which seriously affects the performance of the anti-corrosion layer.

  If the roughness is too small, the adhesion of the coating and the impact strength will be lowered. For severe internal pitting, it is not only possible to rely on large-grain abrasives for high-strength impact, but also to remove the corrosion products by small particles to achieve the cleaning effect, while the reasonable proportioning design can not only slow the abrasion of the pipes and nozzles (blades). And the utilization rate of abrasives can be greatly improved. Usually, the steel pellet has a particle diameter of 0.8 to 1.3 mm, and the steel grit has a particle diameter of 0.4 to 1.0 mm, and 0.5 to 1.0 mm is a main component. The sand shot ratio is generally 5-8.

  It should be noted that in actual operation, the ideal ratio of steel sand and steel shot in the abrasive is difficult to achieve because the hard and brittle steel sand has a higher breaking rate than the steel shot. For this reason, the mixed abrasive should be continuously sampled and tested during the operation. According to the particle size distribution, the new abrasive is added to the descaling machine, and the amount of the steel sand is dominant in the new abrasive.

  4.4 derusting speed

  The descaling speed of the steel pipe depends on the type of abrasive and the displacement of the abrasive. Generally, the abrasive with lower loss rate should be selected, which is beneficial to improve the cleaning speed and the life of the long blade.

  4.5 Cleaning and preheating

  Before the spraying (polishing) treatment, the grease and scale on the surface of the steel pipe are removed by washing, and the tube body is preheated to 40 to 60 ° C by a heating furnace to keep the surface of the steel pipe dry. In the spraying (throwing) treatment, since the surface of the steel pipe does not contain dirt such as grease, the effect of rust removal can be enhanced, and the surface of the dried steel pipe is also advantageous for the separation of the steel shot, the steel sand, the rust and the scale, and the rust removal. The surface of the steel pipe is cleaner.

  In the production, the importance of surface treatment is emphasized, and the process parameters during rust removal are strictly controlled. In actual construction, the peel strength of the steel pipe anti-corrosion layer greatly exceeds the standard requirements, ensuring the quality of the anti-corrosion layer, based on the same equipment. , greatly improve the process level and reduce production costs.

Product Description                       Product description                     

 

 

Product Name

200 series 300 series stainless steel tube for decoration / construction /industry

Application

industry,chemical,electricity,machinery,architecture,decoration,etc.

length

1-6m or as customers requires

Outer Diameter

6-630mm

Thickness

0.5-30mm

Surface

2B,polished,pickling,Annealing,hairline,brush,sand blast,4K,8K,etc

Price term

Ex-Work,FOB,CNF,CFR,CIF,FCA,DDP,DDU.etc

Stock or not

enough stock

Payment term

TT,L/C,western Union

Delivery Time

7-15 days after received the deposit of T/T or L/C

 

 

  

             Chemical composition list              

ASTM

EN

C

Si

Mn

P

S

Cr

Ni

Mo

N

201

1.4372

≤0.15

≤0.75

5.5~7.5

≤0.060

≤0.03

16.00~18.00

3.5~5.5

-

0.05-0.25

202

1.4373

≤0.15

≤1.00

7.5~10.00

≤0.060

≤0.03

17.00~19.00

4.0~6.0

-

0.05-0.25

301

1.4319

≤0.15

≤1.00

≤2.00

≤0.045

≤0.03

16.00~18.00

6.00~8.00

-

0.1

302

1.431

≤0.15

≤1.00

≤2.00

≤0.035

≤0.03

17.00~19.00

8.00~10.00

-

0.1

304

1.4301

≤0.08

≤1.00

≤2.00

≤0.045

≤0.03

18.00~20.00

8.00~10.50

-


304L

1.4306

≤0.03

≤1.00

≤2.00

≤0.045

≤0.03

18.00~20.00

9.00~13.00

-


310

1.4921

≤0.25

≤1.5

≤2

≤0.04

≤0.03

24.00-26.00

19.00-22.00

-


310S

1.4845

≤0.08

≤1.00

≤2.00

≤0.045

≤0.03

24.00~26.00

19.00~22.00

-


316

1.4401

≤0.08

≤1.00

≤2.00

≤0.045

≤0.03

16.00~18.00

10.00~14.00

2.00~

3.00


316L

1.4404

≤0.03

≤1.00

≤2.00

≤0.045

≤0.03

16.00~18.00

12.00~15.00

2.00~

3.00


321

1.4541

≤0.08

≤1.00

≤2.00

≤0.045

≤0.03

17.00~19.00

9.00~13.00

-


430


≤0.12

≤0.75

≤1.00

≤0.040

≤0.03

16.00~18.00


-


2205


≤0.03

≤1.00

≤2.00

≤0.030

≤0.015

22.00~23.00

4.5~6.5

2.5~

3.5


2507


≤0.03

≤0.08

≤1.20

≤0.035

≤0.015

24.00~26.00

6.00~8.00

3.0~

5.0


904L


≤0.02

≤1.00

≤2.00

≤0.045

≤0.035

19.00~23.00

23.00~28.00

4.0~

5.0


INCONEL


≤0.03

≤1.00

≤2.50

≤0.030

≤0.030

≤28.0

≤34.0

≤4.0


28











MONEL


≤0.30

≤0.5

≤2.00

-

≤0.024

-

≥63.0

-


400











INCONEL


≤0.10

≤1.00

≤1.50

-

≤0.015

≤23.0

≤35

4.0~

5.0

-

800











 

 

 

 

                   Product display   

                  

 

 

 

 

Hf106fbfe0cb54071bc23ebddfa2dcaadO_.webp.jpgH1e31b54653ce4fc6a87e7a07bb705090b_.webp.jpg

 

Packaging & Shipping 

Packing

1.Export sea worthy package + water proof paper + wooden pallet
2.Max Loading 26.5mt for each 20Gp container
3.Safe loading and fixing Professional teams
4.Professional shipping line

 

H22c6ffb8f1a347bcba4c08b77d808b75K_.webp.jpgH9dac159119bd43a89192402210729a16g_.webp.jpg

 

Recommed Products:

Ha46f4d7630fb4a37a8f100d03f10388ej.png_.webpHdea0f2903ae9489f9c8826906570067ek.png_.webp
H7c3871e7d6b9480aa97c418ff209277fU.png_.webpH116e6c540b3349e78dad6da03e84af35e.png_.webp

Delivery

5-7 days after confirming the order or according to your order quantity
Port of shipment:shanghai,tianjin,qingdao
Payment:T/T,Western Union,Trade Assurance
Remark: Insurance is all risk and accept the third party test.

Customized aisi 201 304 316 2b surface seamless or welded stainless steel pipeOur Services

 

                        Our Services                         

Pre-sale Service

1.We provide samples free of charge, but the freight should be paid by the buyer

2. We have full stock,and can deliver within short time.Many styles  for your choices. 

3. OEM and ODM order are accepted, Any kind of logo printing or design are available.

4. Good Quality + Factory Price + Quick Response + Reliable Service, is what we are trying best to offer you

5. All of our products are produce by our professional workman and we have our high-work-effect foreign trade team, you can totally believe our service.  

 

 

After you choose

1. We will count cheapest shipping cost and make invoice to you at once.

2. Check quality again, then send out to you at 1-2 working day after your payment,

3. Email you the tracking no, and help to chase the parcels until it arrive you.

 

After-sale choose

1. We are very glad that customer give us some suggestion for price and products.
2. If any question,please contact with us freely by E-mail or Telephone.

 

 

Company Information

 

Cangzhou Steel Pipe Group (CSPG)Co.,Ltd.

No.92 JieFang East Road ,Cangzhou City, Hebei,P.R.China.

CSPG  has more than eighteen years history company which located in Lecong Iron and Steel World, a well-known steel distribution center in China, with superior geographical position and convenient water and land transportation. 


We are a direct-selling manufacturer specializing in the research and development of spiral steel pipes, steel spiral pipes, anti-corrosion steel pipes inside and outside. Since its inception, the company has been guided by a brand-new thinking of steel pipe product market based on the business philosophy of honesty, pragmatism and knowledge-seeking.

Customized aisi 201 304 316 2b surface seamless or welded stainless steel pipeCustomized aisi 201 304 316 2b surface seamless or welded stainless steel pipe

Our company has long-term cooperation relations with the  well-known domestic enterprises. The cooperation period has been more than 10 years, and the annual supply volume is up to 20,000 tons, and we are lucky to be the steel supplier for the subway project of the Chinese government.After years of efforts and accumulation, our company has been widely praised by customers and become a favorite partner of many well-known enterprises.

Related Products

202102011533435151400.webp.webp202102011533433394738.webp.webp

 

Application

Stainless steel pipe is a hollow strip of round steel, which is widely used in petroleum, chemical, medical, food, light industry, mechanical instrumentation and other industrial pipelines and mechanical structural components. In addition, when the bending and torsional strength are the same, the weight is light, so it is also widely used in the manufacture of mechanical parts and engineering structures. Also used as furniture and kitchenware.

Customized aisi 201 304 316 2b surface seamless or welded stainless steel pipe