Properties of Galvanized Steel Pipe Welds

- Jan 01, 2021-

Properties of Galvanized Steel Pipe Welds
Galvanizing has been used to protect iron and steel from rusting for over a hundred years in places as diverse as the wire rope used for the suspension cables on the Brooklyn Bridge to gutters on houses. Galvanizing is simply coating of zinc over steel. Like paint, galvanizing protects steel from rusting by forming a barrier between the steel and the environment, but galvanizing goes one giant step further than paint — it also provides electrochemical protection of the steel. Since zinc is electrochemically more reactive than steel, it oxidizes to protect the steel near it; as a result, even if a galvanized steel surface is scratched down to the bare steel, the galvanizing coating will prevent the steel from rusting. Galvanized steel is, therefore, a superior product to steel with any other type of coating on it since it protects the steel even when the coating is damaged in handling or in service.

The successful welding of Galvanized Steel Pipe is so widely accepted that there is very little recently-published mechanical property data comparing uncoated versus galvanized weld properties. The welding industry recognized fifty years ago that welds on Galvanized Steel Pipe and welds on uncoated steel are of comparable strength if the quality of the welds is comparable. Recent publications on welding Galvanized Steel Pipes deal with weld toughness, porosity control, weld appearance, restoring corrosion resistance and other issues that are much more complex than the strength of the weld.

When using SMAW (“stick”) welding, Galvanized Steel Pipe can be welded in the same manner as uncoated steel. When using MIG or flux cored welding, one may have to adjust the voltage slightly to control spatter, and one may have to clean the welding gun of spatter and zinc oxide deposits more frequently that when welding uncoated steel. Hobart makes a flux cored wire called “Galvacore” that some users have had good success with when welding Galvanized Steel Pipe. 
When difficulty is encountered welding Galvanized Steel Pipe that was not encountered during welding uncoated steel, it is usually because the Welding Engineer has not accounted for the volume of gas that is evolved by the vaporization of zinc during welding. The thicker the zinc coating, the more fumes are generated, and those fumes have to be able to escape easily into the atmosphere and not be forced through the liquid weld metal.

For example, welding galvanized plates to form a T-joint is a commonly troublesome situation. Since the galvanized edge of one plate is butted against another galvanized surface, the zinc vapors that are formed at the abutting surfaces will not be able to escape to atmosphere easily as the zinc is vaporized. Instead, they will blow into the weld pool, creating porosity or a poor weld surface. This is aggravated when welding conventionally hot-dipped products, since the edges frequently have excessively heavy zinc coatings. One solution is to separate the parts by 1/16 inch using wire spacers or fixtures which will leave a gap for the zinc vapors to escape easily. Other approaches are to use a slight (15˚) bevel on one member (Figure 1), to remove the zinc from the faying surfaces by shearing or mechanically cuting the plate where the faying surfaces will meet, and to abrasively remove most of the zinc from one or both of the faying surfaces (Figure 2). Any of these methods will significantly reduce the amount of zinc between the parts, and this will reduce the volume of gas evolved, improving weld quality.

Welding of Galvanized Products
Welding of galvanized steel is done almost exactly the same way as welding of the bare steel of the same composition; the same welding processes, volts, amps, travel speed, etc. can be used with little modification when the switch is made from uncoated steel to galvanized steel — unless the zinc coating is unusually thick. 
The difference between welding galvanized steel and welding uncoated steel is a result of the low vaporization temperature of the zinc coating. Zinc melts at about 900˚F and vaporizes at about 1650˚F. Since steel melts at approximately 2,750˚F and the welding arc temperature is 15,000 to 20,000˚F, the zinc that is near the weld does not stand a chance — it’s vaporized! By the time the weld pool freezes, the zinc is gone. This has two immediate consequences:

Product Description                                              


ASTM A106, ASTM A53, API 5L Gr.B, DIN17175,DIN1629


ASTM A106B, ASTM A53B, ST52, ST37,ST44,ST45

Outer diameter


Wall thickness



3-12m, random or fixed, as the clients' requests


hot rolled


Control with in the standard, OD:+-1%, WT:+-10%



1.Short delivery time

2.Quality assurance

3.Competitive price

4.Superior Service


Products Show                                                     




 4 Inch Q195 Q235  ERW Galvanized Steel Pipe












4 Inch Q195 Q235  ERW Galvanized Steel Pipe

Related Products                                                  

4 Inch Q195 Q235  ERW Galvanized Steel Pipe4 Inch Q195 Q235  ERW Galvanized Steel Pipe

Cold Rolled High Precison Steel Pipe        Special Shape Steel Pipe                     Square Steel Tube

MQO:5TONS                                                      MQO:5TONS                                    MQO:5TONS    

FOB Price:USD800-1000/TON                   FOB Price:USD900-1000/TON           FOB Price:USD700-900/TON


Hot Dip Galvanized Steel Pipe             Hot Rolled carbon steel pipe                   Honed Hydraulic Cylinder Steel Pipe

MQO:5TONS                                           MQO:5TONS                                               MQO:5TONS

FOB Price:USD900-1100/TON               FOB Price:USD800-1000/TON                 FOB Price:USD700-900/TON  


Production Process                                               





Packing & Delivery                                                

4 Inch Q195 Q235  ERW Galvanized Steel Pipe



Packaging Details:

      1. Small OD: In hexagonal bundle with steel strips 
     2. Large OD: In bulk 
    3. Wrapped in waterproof plastic woven bag 
    4. Filled in wooden cases
    5. As required
   Delivery Detail:Shipped in 7-15 days after payment  



Our Factory                                                          

4 Inch Q195 Q235  ERW Galvanized Steel Pipe

4 Inch Q195 Q235  ERW Galvanized Steel Pipe





Q1. Are you trading company or manufacturer ?
A: We are a  factory. Our factory locates in Liaocheng City. If you would like to visit our factory,
just inform us in advance, we warmly welcome all of our clients to visit us.
Q2: How long is your delivery time?
A: Generally, it is 10-35days after receiving the deposit.
Q3. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.
Q4. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, etc

Q5. What is your sample policy?
A: We can supply free samples if we have ready parts in stock, but the courier cost are charged.
Q6: what is your main products?
Our main products are listed as follows: Pricision steel pipe, Hot Rolled steel pipe, Cold Drawn steel pipe, Seamless steel pipe, Alloy steel pipe, Bearing steel pipe, Welded pipe, Spiral pipe, Galvanized pipe etc.